User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-47
TL1 Commands and Messages
TL1 Command List
RTRV-<FacilityType>
Name: Retrieve Configuration
Purpose: Retrieves current configuration settings for T3, T1, or E1 facilities. To edit the settings,
use, see ED-<AIDType> on page 9-29.
Category: Memory Administration Commands
Security: R
Syntax: RTRV-{T3|T1|E1}:[<tid>]:[<aid>]:[<ctag>];
Example: RTRV-T3:tid::ctag;
This command retrieves the configuration for the DS3.
Response: tid 2001-08-04 02:15:52
M ctag COMPLD
"AISC=LOS&AISNAS&LOF,AIST=ONES,CKTID=DS3,
CMDMDE=FRCD,FMT=M23,IDLE=N,LBO=1,LINECDE=B3ZS,
MCOND=LOS&RAI&AISNAS&LOF&T-ERL&RTCLK&IMPROPRMVL&
IRR&CONTEQPT&BPV,OMODE=NORM,XBIT=PASS,XBITRCV=ALM1,
XPOL=ALM1,TMG=INT,TMGLOCK=N"
;
Field Description
aid Access ID depends on LSType:
• For T1 modifier, use DS1-1 to DS1-28, or ALL
• For E1 modifier, use E1-1 to E1-27, or ALL
• For T3 modifier, use ALL
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
Field Description
AISC Specifies conditions on the input (receive) side of a connection under
which AIS will be generated on the output (transmit) side of a
connection. This is hard-coded in the Wide Bank to
LOS&AISNAS&LOF.
AIST Indicates the type of the AIS signal to be generated/transmitted, and
the AIS signal mode expected on input should a failure condition
exist. This is hard-coded in the Wide Bank to ONES.
CKTID The circuit identification parameter contains the Common Language
Circuit ID or other alias of the channel being provisioned. This is an
ASCII string limited to 32 characters.