User manual

TL1 Commands and Messages

TL1 Command List

9-46 July 2004 Wide Bank 28 DS3 - Release 2.4

RMV-<AIDType>

Name: Remove {T3|T1|E1}

Purpose: Removes a T3, T1, or E1 channel from service. To put facility back in service, see ENT-

<LSType> on page 9-33.

Note: A T3 can not actually be removed from service. The purpose of the RMV-T3

command is to allow the active T3 to be tested.

Category: Transport Surveillance Commands

Security: RW

Syntax: RMV-{T1|E1}:[<tid>]:<aid>:[<ctag>];

Example: RMV-T1:tid:DS1-1:ctag;

RST-<AIDType>

Name: Restore {T3|T1|E1}

Purpose: Restores a T3, T1, or E1 channel to service.

Category: Transport Surveillance Commands

Security: RW

Syntax: RST-{T3|T1|E1}:[<tid>]:<aid>:[<ctag>];

Example: RST-T1:tid:DS1-1:ctag;

Field Description

aid Access ID depends on AIDType:

• For T3 modifier, use ALL

• For T1 modifier, use DS1-1 to DS1-28, or ALL

• For E1 modifier, use E1-1 to E1-27, or ALL

ctag Correlation Tag (optional)

tid

Target ID of network element (optional)