User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-45
TL1 Commands and Messages
TL1 Command List
RLS-LPBK-<FacilityType>
Name: Release Loopback
Purpose: Releases the specified loopback(s). To operate loopbacks, see OPR-LPBK-
<FacilityType> on page 9-43.
Category: Transport Surveillance Commands
Security: RW
Syntax: RLS-LPBK-{T3|T1|E1|ALL}:[<tid>]:<aid>:[<ctag>]
[::,,,<lpbktype>];
Syntax: RLS-LPBK-T1:[<tid>]:DS1-1:123::,,,EQUIPMENT;
Release DS1 #1 equipment loopback.
Example: RLS-LPBK-ALL:tid:ALL:ctag;
Release all loopbacks.
Field Description
FacilityType T1, E1, T3, ALL
aid Access ID depends on selected Facility Type. See table below.
ctag Correlation Tag (optional)
lpbktype Loopback Type depends on selected Facility Type. See table below.
tid
Target ID of network element (optional)
Facility Type aid <lpbktype>
ALL ALL
T3 ALL
Note: This refers to the
Active Controller
EQUIPMENT, LINE, PAYLOAD
T1 DS -01 to DS -28
ALL
EQUIPMENT, LINE, METALLIC
EQUIPMENT, LINE
E1 E1-1 to E -27 EQUIPMENT, LINE, METALLIC