User manual

TL1 Commands and Messages
TL1 Command List
9-40 July 2004 Wide Bank 28 DS3 - Release 2.4
Example: INIT-LOG:tid::ctag::EVT;
Clear event log.
Example: INIT-LOG:tid::ctag::ALL;
Clear all logs.
INIT-REG-<FacilityType>
Name: Initialize Register
Purpose: Clears the contents of the specified register. This command is used to clear the
performance monitoring data for the DS1 and DS3 interfaces.
Category: Transport Surveillance Commands
Security: RW
Syntax: INIT-REG-{T3|T1|E1|ALL}:[<tid>]:[<aid>]:
[<ctag>]::ALL;
Example: INIT-REG-T3:tid::ctag::ALL;
Clear DS3 Performance Monitoring Statistics.
Example: INIT-REG-T1:tid:DS1-15:ctag::ALL;
Clear DS1-15 Performance Monitoring Statistics.
Field Description
aid Access ID depends on selected FacilityType. See table below.
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
FacilityType aid
T3 ALL or null
T1 DS1-1 to DS1-32, or ALL
E1 E1-1 to E1-31, or ALL
ALL ALL or null