User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-39
TL1 Commands and Messages
TL1 Command List
Example: INH-SWTOPROTN-ALL:tid:ALL:ctag;
Inhibit DS1 and DS3 Protection.
INH-SWTOWKG
Name: Inhibit Switching To Working
Purpose: Disarms the DS3 protection switch circuit. To allow switching, see ALW-SWTOWKG-
<FacilityType> on page 9-23.
Category: Transport Surveillance Commands
Security: RW
Syntax: INH-SWTOWKG-T3:[<tid>]:ALL:[<ctag>];
Example: INH-SWTOWKG-T3:tid:ALL:ctag;
INIT-LOG
Name: Initialize Log
Purpose: Clears the contents of the specified log (see Log Identifier <lognm> on page 9-93)
NOTE: If you clear the event log, timestamps for any existing alarms or conditions are
also cleared.
Category: Transport Surveillance Commands
Security: RW
Syntax: INIT-LOG:[<tid>]::[<ctag>]::<lognm>;
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
Field Description
ctag Correlation Tag (optional)
lognm
Name of Log. Values are:
• ALL – clears all logs
• SECURITY – security event log
• EVT – event log
• EVT-STBY – event log in standby Controller
tid
Target ID of network element (optional)