User manual

TL1 Commands and Messages
TL1 Command List
9-38 July 2004 Wide Bank 28 DS3 - Release 2.4
INH-PMREPT-<FacilityType>
Name: Inhibit Performance Monitoring Report
Purpose: Inhibits any scheduled performance monitoring reports. To allow reports, see ALW-
PMREPT-<FacilityType> on page 9-22.
Category: Transport Surveillance Commands
Security: RW
Syntax: INH-PMREPT-{T3|T1|E1|ALL}:[<tid>]:[<aid>]:[<ctag>];
Example: INH-PMREPT-ALL:tid:ALL:ctag;
Inhibits Performance Reports for All Facility Types.
Example: INH-PMREPT-T1:tid:ALL:ctag;
Inhibits Performance Reports for T1.
INH-SWTOPROTN-<FacilityType>
Name: Inhibit Switching to Protection
Purpose: Disables the automatic electronics protection of the DS1/E1 or DS3 channels. To allow
protection, see ALW-SWTOPROTN-<FacilityType> on page 9-22.
Category: Transport Surveillance Commands
Security: RW
Syntax: INH-SWTOPROTN-{T3|T1|E1|ALL}:[<tid>]:ALL:[<ctag>];
Example: INH-SWTOPROTN-T1:tid:ALL:ctag;
Inhibit DS1 Protection.
Field Description
aid Value must be ALL.
If aid is omitted, it will default to ALL.
See Access Identifier <aid> on
page 9-84
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)