User manual

TL1 Commands and Messages
TL1 Command List
9-36 July 2004 Wide Bank 28 DS3 - Release 2.4
INH-LPBK-<FacilityType>
Name: Inhibit Loopback
Purpose: Disables the detection of loop codes.
To allow loopbacks, see ALW-LPBK-<FacilityType> on page 9-20.
Category: Transport Surveillance Commands
Security: RW
Syntax: INH-LPBK-{T1|E1|T3|ALL}:[<tid>]:[<FacilityID>]:
[<ctag>];
Example: INH-LPBK-T1:tid:DS1-1:ctag;
Inhibit DS1 #1 loopback.
Example: INH-LPBK-ALL:tid:ALL:ctag;
Inhibit the detection of all loop codes.
Field Description
ctag Correlation Tag (optional)
FacilityID
Facility ID depends on selected FacilityType:
• For T1, use DS1-1 to DS1-28
• For E1, use E1-1 to E1-27
• For T3 or ALL, use ALL or omit
FacilityID
tid
Target ID of network element (optional).