User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-35
TL1 Commands and Messages
TL1 Command List
INH-AUTORST
Name: Inhibit Automatic Restoration
Purpose: Disables revertive switching modes.
To allow revertive switching modes, see ALW-AUTORST on page 9-18.
Category: Transport Surveillance Commands
Security: RW
Syntax: INH-AUTORST:[<tid>]::[<ctag>]::{DS1EQPT|DS3EQPT|SYNC};
Example: INH-AUTORST:tid::ctag::EQPT;
INH-LOG-SECU
Name: Inhibit Log Security
Purpose: Inhibits the recording of security events.
To allow recording, see ALW-LOG-SECU on page 9-19.
Category: Security Commands
Security: RWA
Syntax: INH-LOG-SECU:[<tid>]:SECURITY:[<ctag>]::ALL;
Example: INH-LOG-SECU:tid:SECURITY:ctag::ALL;
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
DS1EQPT
Turns off DS1 revertive switching
DS3EQPT
Turns off DS3 revertive switching
SYNC Turns off Clockrevert
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)