User manual

TL1 Commands and Messages
TL1 Command List
9-34 July 2004 Wide Bank 28 DS3 - Release 2.4
ENT-USER-SECU
Name: Enter User Security
Purpose: Used by the administrator to enter the security parameters associated with a particular
user to create an account for that user. (To edit parameters for an existing user, see ED-
USER-SECU on page 9-32. To view existing users, see RTRV-USER-SECU on
page 9-72. To delete an existing user, see DLT-USER-SECU on page 9-28.)
The maximum number of TL1 user names is 10, including the administrators. The
default "admin" user name will be deleted after entering another user with RWA
privilege. It is recommended to have at least two RWA users.
Category: Security Commands
Security: RWA
Syntax: ENT-USER-SECU:[<tid>]:<uid>:[<ctag>]::<pid>,,<uap>;
Example: ENT-USER-SECU:tid:FRED:ctag::FRED-22,,RW;
Creates new user named FRED with password FRED-22 and access RW.
Field Description
ctag Correlation Tag: a number used to match Responses with Commands
pid New User Private ID: ASCII string up to 10 characters long with at
least two non-alphabetic characters with at least one special
character, such as FRED-22. Omit to remove password requirement.
tid
Target ID of network element (optional)
uap New User Access Privilege:
• R – Read Only
• RW – Read-Write
• RWA – Read-Write-Administrator
See Security Levels on
page 9-8.
uid User ID (user name): Up to 10 alphanumeric characters.