User manual

TL1 Commands and Messages
TL1 Command List
9-32 July 2004 Wide Bank 28 DS3 - Release 2.4
Example: ED-PID:tid:JOHNDOE:ctag::JOHN-22,SECRET-1;
ED-USER-SECU
Name: Edit User Security
Purpose: Used by the administrator to edit the security parameters associated with a particular
user. (To create a new user, see ENT-USER-SECU on page 9-34.)
Category: Security Commands
Security: RWA
Syntax: ED-USER-SECU:[<tid>]:<uid>:[<ctag>]::
<new-uid>,<new-pid>,,<new-uap>;
Example: ED-USER-SECU:tid:ADMIN:ctag::FRED,FRED-1,,RW;
old-pid
Old Private ID
Field Description
ctag Correlation Tag (optional)
new-pid
New User Private ID (password). An ASCII string up to 10 characters
long with at least two non-alphabetic characters with at least one
special character, such as FRED-1.
Omit to remove password requirement.
new-uap
New User Access Privilege:
• R – Read Only
• RW – Read-Write
• RWA – Read-Write-Administration
See Security Levels on
page 9-8.
Note: If there is only one user with RWA, that user cannot be
demoted or deleted.
new-uid
New User ID (user name): Up to 10 alphanumeric characters.
tid
Target ID of network element (optional)
uid User ID. Default is admin.
Field Description