User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-25
TL1 Commands and Messages
TL1 Command List
CONN-LPBK-T3
Name: Connect Loopback T3
Purpose: Activates T3 loopback. To disconnect loopbacks, see DISC-LPBK-<FacilityType> on
page 9-27.
Category: Network Maintenance Commands
Security: RW
Syntax: CONN-LPBK-T3:[<tid>]:ALL:[<ctag>]::<lpsig>;
Example: CONN-LPBK-T3:tid::ctag::A-C;
CPY-MEM
Name: Copy Memory
Purpose: Copies memory from one location to another
Category: Transport Surveillance Commands
Security: RW
Syntax: CPY-MEM:[<tid>]::[<ctag>]::<frommem>,,<tomem>;
Field Description
ctag Correlation Tag (optional)
lpsig Looping Signal:
A-C – Activate a line loopback at the Far NE
R-C – Release a line loopback at the Far NE
tid
Target ID of network element (optional)
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
frommem The data area from which memory is to be copied
:
•ACTIVE
•CONFIG
STANDBY
TEMP
See
Memory <frommem> and <tomem> on page 9-94.
tomem The data area where memory is to be copied (see above)