User manual
TL1 Commands and Messages
TL1 Command List
9-22 July 2004 Wide Bank 28 DS3 - Release 2.4
ALW-PMREPT-<FacilityType>
Name: Allow Performance Monitoring Report
Purpose: Allows performance reports to be sent. To inhibit reports, see INH-PMREPT-
<FacilityType> on page 9-38.
Category: Transport Surveillance Commands
Security: RW
Syntax: ALW-PMREPT-{T3|T1|E1|ALL}:[<tid>]:[<aid>]:[<ctag>];
Example: ALW-PMREPT-ALL:tid:ALL:ctag;
Allow Performance Reports for All Facility Type.
Example: ALW-PMREPT-T1:tid:ALL:ctag;
Allow Performance Reports for T1.
ALW-SWTOPROTN-<FacilityType>
Name: Allow Switching To Protection
Purpose: Enables the automatic electronics protection of the DS1/E1 or DS3 channels. To inhibit
protection, see INH-SWTOPROTN-<FacilityType> on page 9-38.
Category: Transport Surveillance Commands
Security: RW
Syntax: ALW-SWTOPROTN-{T3|T1|E1|ALL}:[<tid>]:ALL:[<ctag>];
Example: ALW-SWTOPROTN-T1:tid:ALL:ctag;
Field Description
aid Access ID. Value must be ALL. If aid is omitted, it will default to
ALL.
See Access Identifier <aid> on
page 9-84
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)