User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-21
TL1 Commands and Messages
TL1 Command List
Syntax: ALW-MSG-{T1|E1|EQPT|T3|ALL}:[<tid>]::[<ctag>]::
[<ntfcncde>];
Syntax: ALW-MSG-{T1|E1|EQPT|T3|ALL}:[<tid>]::[<ctag>]::
[<condtype>];
Example: ALW-MSG-ALL:tid::ctag::MJ;
Enable Transmission of all Major Alarms.
Example: ALW-MSG-T1:tid::ctag::IMPROPRMVL;
Enable Transmission of a Specific Message.
Example: ALW-MSG-ALL:tid::ctag;
Enable Transmission of ALL Messages.
Field Description
aid Access ID: T1, E1, EQPT, T3, or ALL
See Access Identifier <aid> on
page 9-84
condtype Type of alarm or condition.
See Condition Type <condtype> on
page 9-87
ctag Correlation Tag (optional)
ntfcncde Severity or class of alarm, event or condition.
See Notification Code <ntfncde> on
page 9-96