User manual

TL1 Commands and Messages
TL1 Overview
9-8 July 2004 Wide Bank 28 DS3 - Release 2.4
AIDType
Access Identifier Types:
 E1 – for E1 parameters
 EQPT – for Equipment parameters
 ENV – for Environmental parameters
 T1 – for DS1 parameters
 T3 – for DS3 parameters
 ALL – for ALL parameters
Security Levels
To prevent unauthorized access to the network, the administrator assigns security levels to each user
account. TL1 commands have the following three security levels.
 RWA (Read-Write-Administration) for administrators (admins) with full privileges
 RW (Read-Write) for operators that need to monitor and edit data
 R (Read Only) for users that need only to monitor data
TL1 Shortcuts (Recall and Edit)
To simplify entering repetitive commands, the Wide Bank allows you to “recall” the previous ten
commands entered by pressing the up and down arrow keys. Press the up arrow to recall the
previous command (go backwards), and the down arrow key to go forward.
The Wide Bank also allows you to edit TL1 commands by using the backspace key to delete
mistakes and retyping characters. This also allows you to easily recall and edit a previous command
to change characters, and then press the semicolon key to enter the modified command.