User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-85
CLI Commands and Messages
CLI Command List
Example: user "henry" add
New password: ********
Confirm new password: ********
New password accepted
Successfully added new user “henry”
Example is from a Wide Bank with the Security Upgrade option.
Example: user "henry" add
Successfully added new user "henry".
Example is from a Wide Bank without the Security Upgrade option.
Example: user "henry" level rw
Successfully set "henry"'s access level to rw.
Example: user "henry" password
New password: ********
Confirm new password: ********
New password accepted
VERSION
Name: Version of Software
Purpose: Show the current boot and software versions. If the Wide Bank has the Security
Upgrade option (see Security on page 1-5), the software version is preceded by the
word “Security.”
Security: ro and above
Syntax: version [standby]
Example: version
Boot Version 1.02
Security Software Version 2.43.0
This response indicates that the Wide Bank has the Security Upgrade option.
Field Description
standby Standby Controller. If included, shows version of software installed
on standby Controller card.