User manual

CLI Commands and Messages
CLI Command List
8-82 July 2004 Wide Bank 28 DS3 - Release 2.4
Example: tl1 networkid "MULTIPLEXER-1"
In addition to changing the Network ID for TL1 messages, this command also changes
the command line prompt. After using the command in this example, the prompt would
display as follows:
MULTIPLEXER-1 (A:Active)>
Example: tl1 "act-user::admin:::password;"
Sends an embedded TL1 command to activate the admin user. The CLI displays the
TL1 response as in the completed (COMPLD) message below. See Chapter 9 for
detailed TL1 information.
2001-05-09 13:58:28
M 0 COMPLD
;
USER
Name: User Configuration
Purpose: Add and delete users, assign security levels, and set passwords.
Basic Security – With basic security (see Security on page 1-5), only the admin user
can add and delete users and assign security levels. Users can change their own
passwords with the user “username” password command.
For convenience in new installations, the security on command (see SECURITY on
page 8-69) automatically logs in the admin user (always named “admin”). While
security is on, subsequent logins require a username and an associated password (if the
password is not blank). The security off command disables multiple-user security
protection and logs off the admin user.
The maximum number of CLI user names is 10, including the admin user. The admin
user cannot be deleted and no other user can have admin access.
Security Upgrade – With the Security Upgrade (see Security on page 1-5), only the
secu user can use this command. Users are not permitted to change their own
passwords.
For convenience in new installations, the security on command (see SECURITY on
page 8-69) automatically logs in the secu user (always named “security”). While
security is on, subsequent logins require a username and an associated password. The
security off command disables multiple-user security protection, and logs off the secu
user.
The maximum number of CLI user names is 10, including the secu user. The secu user
cannot be deleted and no other user can have secu access.