User manual

CLI Commands and Messages
CLI Command List
8-78 July 2004 Wide Bank 28 DS3 - Release 2.4
Example: status ppp
PPP Interface:
Operational Status up
MTU 1500
Speed 28200
Bytes Received 56
Unicast Packets (in) 0
Non-Unicast Packets (in) 0
Discarded Packets (in) 0
Errors (in) 0
Unknown Protocols (in) 0
Bytes Transmitted 66
Unicast Packets (out) 0
Non-Unicast Packets (out) 0
Discarded Packets (out) 0
Errors (out) 0
Example: status tcp
TCP Interface:
Round Trip Algorithm Type Van Jacobson's
Minimum Round Trip (ms) 0
Maximum Round Trip (ms) 240000
Actively Opened Connections 0
Passively Opened Connections 29
Failed Connection Attempts 0
Established Connections Reset 14
Currently Established 1
Segments Received 5179
Segments Sent 4436
Errors (in) 0
Retransmitted Segments 16
SWITCH
Name: Switch Controllers
Purpose: Toggle control between the currently active and standby Controllers. The standby
Controller becomes active and takes control of the DS3 line, control logic, and power
conversion. This command has no options.
Security: rw and above
Syntax: switch