User manual

CLI Commands and Messages
CLI Command List
8-74 July 2004 Wide Bank 28 DS3 - Release 2.4
Syntax: security tl1 [enable|disable]
Example: security tl1 disable
TL1 feature disabled
SNMP
Name: SNMP Configuration
Purpose: Configure SNMP for trap reporting and management using the embedded SNMP
agent. The trapcom setting is used to report traps to network management alarm
systems (see SNMP Traps on page 8-5).
Security: rw and above with basic security; admin and above with Security Upgrade
See Security on page 1-5 for an overview of basic security and the Security Upgrade
option.
Syntax: snmp {contact|location|name|getcom|setcom|trapcom}
{"string"}
Example: snmp name "DS3 28 M13 Multiplexer"
Field Description
security tl1 Use the command by itself to show the current setting
enable Enable TL1 (default)
disable Disable TL1
Field Description
snmp
Use the command by itself to show the current settings
contact
Set the contact name
location
Set the location name
name
Set the system name
getcom
Set the Get Community name (used for read permission)
setcom
Set the Set Community name (used for write permission)
trapcom
Set the Trap Community name (used for trap authentication)
"string"
An alphanumeric character string