User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-71
CLI Commands and Messages
CLI Command List
SECURITY ETHERNET
Name: Security Ethernet Port Enable/Disable
Purpose: Disable the Ethernet port to prevent unauthorized SNMP, TCP/IP TL1, and Telnet
sessions. This command is available only with the Security Upgrade option (see
Security on page 1-5).
NOTE: If you disable the Ethernet port, you cannot also disable the RS-232 CLI port.
The RS-232 CLI port must remain active to provide CLI management access.
Security: secu
Syntax: security ethernet [enable|disable]
Example: security ethernet disable
Disabling this port will affect the ability to remotely
manage this unit. It will not be possible to remotely
manage this unit on IP Address nnn.nnn.nnn.nnn
Do you want to disable the Ethernet port now (y/n)?
SECURITY RS232CLI
Name: Security RS-232 CLI Port Enable/Disable
Purpose: Disable the 9-pin RS-232 CLI port to prevent unauthorized CLI sessions. This
command is available only with the Security Upgrade option (see Security on
page 1-5).
NOTE: If you disable the RS-232 CLI port, you cannot also disable the Ethernet port.
The Ethernet port must remain active to provide CLI management access. Before
disabling the CLI port, you must assign a valid IP address to the Wide Bank (cannot be
null, 0.0.0.0, or 255.255.255.255). See Configuring IP and PPP Addresses on page 6-15
for information about setting the IP address.
Security: secu
Field Description
security ethernet Use the command by itself to show the current setting
enable Enable the Ethernet port (default)
disable Disable the Ethernet port