User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-65
CLI Commands and Messages
CLI Command List
ds3 clock int
ds3 clockrevert on
ds3 equipment off
ds3 framing m23
ds3 length short
ds3 line off
ds3 loopdetect off
ds3 payload off
ds3 protection off
ds3 send off
ds3 threshold off
ffo present off When an FFO-capable
Controller is powered
up or a fan faceplate is
removed and reinstalled,
the Controller will
detect the fan faceplate
and set ffo present on.
ip address none
ip gateway none
ip mask none
ip nms1 none
ip nms2 none
ip nms3 none
revertive ds1 off
revertive ds3 on
screen 24
security This setting is not
changed by the restore
defaults command.
snmp contact "Contact"
snmp getcomm "public"
snmp location "Location"
snmp name "Name"
snmp setcomm "public"
snmp trapcomm "public"
Parameter Default Comments