User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-63
CLI Commands and Messages
CLI Command List
PING
Name: Ping
Purpose: Use the Ping command (ICMP echo) to test whether or not the management node (or
other host) on the network is responding.
Security: ro and above
Syntax: ping {ipaddress} [number] [delay]
Example: ping 172.26.100.25 3
Send three ping queries to a networked device with IP address of 172.26.100.25.
PROGRAM FLASH
Name: Program Flash Memory
Purpose: Program the flash memory with the software previously loaded into RAM by the
LOAD command, if you did not choose to program the flash during the download
process. See LOAD on page 8-49.
There are no options for this command. See Downloading New Software on page 6-23
for more detail.
Security: rw and above with basic security; admin and above with Security Upgrade
See Security on page 1-5 for an overview of basic security and the Security Upgrade
option.
Syntax: program flash
RESTORE
Name: Restore Configuration
Purpose: Use this command to restore the factory default configuration, download a previously
saved TFTP configuration, or retrieve the temp copy from RAM. See SAVE on
page 8-68 and TEMP COPY on page 8-79.
This command will not change the Wide Banks’s IP address, user names, or passwords.
Field Description
ipaddress IP address of the device to query.
number The number of pings to send. If a number is not specified, the system
will send one ping request.
delay The delay between pings, 500 to 5000 ms. (optional)