User manual

CLI Commands and Messages
CLI Command List
8-54 July 2004 Wide Bank 28 DS3 - Release 2.4
Example: ls 8 disable
Disable DS1 #8.
LS EQUIPMENT
Name: LS Equipment Loopback
Purpose: Set equipment loopback toward low-speed side (see chapter 7).
Security: rw and above
Syntax: ls {number|range|list|all} equipment {on|off}
Example: ls 2 equipment on
Apply LS #2 equipment loopback.
Field Description
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
all All low-speed interfaces
enable Activate low-speed interface
disable Deactivate low-speed interface
Field Description
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
all All low-speed interfaces
equipment Send equipment loopback toward low-speed side
on Apply equipment loopback
off Remove equipment loopback