User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-49
CLI Commands and Messages
CLI Command List
Example: ip
ip address 192.168.3.161
ip mask 255.255.255.0
ip gateway 192.168.3.202
ip nms1 192.168.3.233
ip nms2
ip nms3
Example: ip address 192.168.90.2
Modifying IP address will affect ability to remotely manage this unit.
The IP address for remote management will be 192.168.90.2
Do you want to update the IP address now (y/n)?
Set IP address of Wide Bank primary Controller.
Example: ip mask 255.255.255.0
Set subnet mask.
Example: ip nms1 192.168.95.17
Set NMS2 IP address for reporting traps.
Example: ip route ppp 192.168.90.40
Set route for outbound packets over C-bit PPP link.
LOAD
Name: Load Software
Purpose: Initiate a download of Wide Bank software from a management PC or a network TFTP
server to the Wide Bank. See Downloading New Software on page 6-23 for the
downloading procedure.
Security: rw and above
Syntax: load {xmodem|tftp ipaddress "filename"}
Field Description
xmodem Download software via XModem
tftp Download software via TFTP
ipaddress Host IP address of TFTP server, in the form xxx.xxx.xxx.xxx, where
xxx is a number from 0 to 255.
"filename" Set Network Management System (NMS) #1 to receive SNMP Trap
notifications