User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-39
CLI Commands and Messages
CLI Command List
DS3 PM THRESHOLD
Name: DS3 Performance Monitor Threshold
Purpose: Set or show the threshold value for PM statistics. When the threshold is exceeded, the
Wide Bank will log a CLI event and send an automatic TL1 message. The performance
threshold function complies with Telcordia GR-820-CORE.
Security: Set - rw and above
Show - ro and above
Syntax: ds3 pm threshold [interval error value]
Field Description
ds3 pm threshold Use the command by itself to show the current setting
interval Specify measurement time interval (see intervals below)
error Specify error type (see errors below)
value An integer value specifying the threshold error count for the
measurement interval.
Set to zero to disable threshold crossing alerts.
Maximum values for error-seconds are:
900 per 15-minute interval
3,600 per hour interval
86,400 per day interval
Maximum values (register size) for cvl and cvp_p errors are:
2,147,483,647
Interval Description
min15 15 minutes
hour One hour
day One day
Error Description
cvl Code Violations - Line. The total number of line code violations that
have been detected during the measurement interval. A CVL is the
occurrence of a Bipolar Violation (BPV) OR Excessive Zeros (EXZ).
BPVs that are part of the zero substitution code are excluded.
esl
Errored Seconds - Line. The number of one-second intervals
containing one or more CVLs OR one or more Loss of Signal (LOS)
defects detected during the measurement interval. An ESL is the
occurrence of one or more Bipolar Violations (BPVs), one or more
Excessive Zeros (EXZs), or one or more Loss of Signal (LOS)
defects.