User manual

CLI Commands and Messages
CLI Command List
8-38 July 2004 Wide Bank 28 DS3 - Release 2.4
Syntax: ds3 locationid {"string"}
Example: ds3 locationid "Denver"
DS3 LOOPDETECT
Name: DS3 Loopcode Detection
Purpose: Set the DS3 interface setting for detection of loopcodes.
Security: rw and above
Syntax: ds3 loopdetect {on|off}
Example: ds3 loopdetect on
DS3 PAYLOAD
Name: DS3 Payload Loopback
Purpose: Set the DS3 interface setting for payload loopback toward the DS3 interface.
Security: rw and above
Syntax: ds3 payload {on|off}
Example: ds3 payload on
Field Description
locationid DS3 location ID
"string" Alphanumeric string providing DS3 Location ID
Field Description
loopdetect DS3 loopcode detection
on Enable loopcode detection
off Disable loopcode detection (default)
Field Description
payload DS3 payload loopback
on Enable payload loopback toward DS3 interface
off Disable payload loopback (default)