User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-37
CLI Commands and Messages
CLI Command List
DS3 LENGTH
Name: DS3 Length for Line Buildout
Purpose: Set the DS3 line buildout (LBO).
Security: rw and above
Syntax: ds3 length {long|short}
Example: ds3 length long
DS3 LINE
Name: DS3 Line Loopback
Purpose: Set the DS3 line loopback toward the DS3 interface (see chapter 7).
Security: rw and above
Syntax: ds3 line {on|off}
Example: ds3 line on
DS3 LOCATIONID
Name: DS3 Location Identification
Purpose: Set the DS3 Location Identification code to be sent on the C-bit parity link to the far
end.
Security: rw and above
Field Description
length DS3 line buildout
long 50 feet or more
short Less than 50 feet (default)
Field Description
line DS3 line loopback
on Apply line loopback toward DS3 interface
off Disable line loopback