User manual

CLI Commands and Messages
CLI Command List
8-34 July 2004 Wide Bank 28 DS3 - Release 2.4
DS3 CLOCKREVERT
Name: DS3 Clock Revertive Switching
Purpose: Set or show the DS3 clock revertive switch setting. When turned on, the transmit clock
will revert to the original clock source when it is considered to be healthy again.
Security: Set - rw and above
Show - ro and above
Syntax: ds3 clockrevert [off|on]
Example: ds3 clockrevert on
DS3 EQUIPMENT
Name: DS3 Equipment Loopback
Purpose: Set the DS3 equipment loopback (see chapter 7).
Security: rw and above
Syntax: ds3 equipment {off|on}
Example: ds3 equipment on
Field Description
ds3 clockrevert Show DS3 clock revert setting
clockrevert DS3 clock revert setting
off Turn off revertive clock switching
on Turn on revertive clock switching
Field Description
on Send DS3 equipment loopback toward the low-speed side
off Disable DS3 equipment loopback