User manual

CLI Commands and Messages
CLI Command List
8-32 July 2004 Wide Bank 28 DS3 - Release 2.4
Example: ds1 5 send csu loopup drop
Send DS1 #5 CSU loopup code toward low-speed drop side.
DS3
Name: DS3 Interface
Purpose: Show the DS3 interface settings.
Security: ro and above
Syntax: ds3
Example: ds3
- DS3
ds3 circuitid "DS3"
ds3 clock int
ds3 clockrevert on
ds3 equipmentid "DS3 Equip."
ds3 equipment off
ds3 facilityid "DS3 Path"
ds3 frameid "Frame"
ds3 framing cbit
ds3 gennumber "DS3 Test Generator"
ds3 length short
ds3 line off
ds3 locationid "DS3 Loc."
ds3 loopdetect off
ds3 payload off
ds3 portnumber "DS3 Idle Port"
ds3 send off
ds3 threshold off
ds3 unit "000000"
Performance Thresholds: 15 min. 1 hour 1 day
-------- -------- --------
coding violations - line: 0 0 0
errored seconds - line: 0 0 0
coding viols-path p-bit: 0 0 0
err seconds - path p-bit: 0 0 0
loss of signal secs - line: 0 0 0
sev err seconds - line: 0 0 0
sev err sec - path cp-bit: 0 0 0