User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-29
CLI Commands and Messages
CLI Command List
DS1 PM THRESHOLD
Name: DS1 Performance Monitor Threshold
Purpose: Set or show the threshold value for PM statistics. When the threshold is exceeded, the
Wide Bank will log a CLI event and send an automatic TL1 message. The performance
threshold function complies with Telcordia GR-820-CORE.
Security: Set - rw and above
Show - ro and above
Syntax: ds1 {number|range|list} pm threshold [interval error
value]
Example: ds1 5 pm threshold
The following message shows the default values defined in GR-820-CORE.
Field Description
pm threshold Use the command by itself to show the current setting
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
interval Specify measurement time interval (see Interval table below)
error Specify error type (see Error table below)
value An integer value specifying the threshold error count for the
measurement interval.
Set to zero to disable threshold crossing alerts.
Interval Description
min15
15 minutes
hour
One hour
day
One day
Error Description
cvl Code Violations - Line. The total number of line code violations that
have been detected during the measurement interval. A CVL is the
occurrence of a Bipolar Violation (BPV).
esl
Errored Seconds - Line. The number of one-second intervals
containing one or more CVLs or one or more Loss of Signal (LOS)
defects.