User manual

CLI Commands and Messages
CLI Command List
8-28 July 2004 Wide Bank 28 DS3 - Release 2.4
Syntax: ds1 {number|range|list|all} metallic {on|off}
Example: ds1 11 metallic on
Apply DS1 #11 metallic loopback.
DS1 MOVE
Name: DS1 Move Channel
Purpose: Move low-speed channel to home card or spare card. Moving a circuit home does not
reset the revertive state (REVERTIVE on page 8-67).
Security: rw and above
Syntax: ds1 {number|range|list|all} move {home|spare}
Example: ds1 13 move spare
Move DS1 #13 from home card to spare card.
Field Description
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
all All low-speed interfaces
metallic Send metallic loopback toward low-speed side
on Apply metallic loopback
off Disable metallic loopback
Field Description
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
all All low-speed interfaces
move Move low-speed channel
home Move channel to home card
spare Move channel to spare card