User manual

CLI Commands and Messages
CLI Command List
8-24 July 2004 Wide Bank 28 DS3 - Release 2.4
Syntax: ds1 {number|range|list|all} {enable|disable}
Example: ds1 8 disable
Disable DS1 #8.
DS1 EQUIPMENT
Name: DS1/E1 Equipment Loopback
Purpose: Set equipment loopback toward low-speed side (see chapter 7).
Security: rw and above
Syntax: ds1 {number|range|list|all} equipment {on|off}
Example: ds1 2 equipment on
Apply DS1 #2 equipment loopback.
Field Description
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
all All low-speed interfaces
enable Activate low-speed interface
disable Deactivate low-speed interface
Field Description
number Low-speed interface number, 1 to 28
range A range of low-speed channels separated by a hyphen as in 5-8
list A list of low-speed channels separated by commas as in 1,3,5,9
all All low-speed interfaces
equipment Send equipment loopback toward low-speed side
on Apply equipment loopback
off Remove equipment loopback