User manual

CLI Commands and Messages
CLI Command List
8-18 July 2004 Wide Bank 28 DS3 - Release 2.4
ip nms2
ip nms3
snmp name "Name"
snmp location "Location"
snmp contact "Contact"
snmp getcomm "public"
snmp setcomm "public"
snmp trapcomm "public"
COPY
Name: Copy Configuration
Purpose: Copy current configuration settings from the active Controller to the standby
Controller. This command is not required when autocopy is enabled (see AUTOCOPY
on page 8-14).
Security: rw and above with basic security; admin and above with Security Upgrade
See Security on page 1-5 for an overview of basic security and the Security Upgrade
option.
Syntax: copy
DATE
Name: Date
Purpose: Set or show the date of the Wide Bank system clock.
Security: Set - rw and above with basic security; admin and above with Security Upgrade
Show - ro and above
See Security on page 1-5 for an overview of basic security and the Security Upgrade
option.
Syntax: date [mm/dd/yyyy]
Example: date
The time is 14:03:53 09/05/2002
Setting Description
date Use the command by itself to show the current setting
mm Month = 1 to 12
dd Day = 1 to 31
yyyy Year = 1997 and up