User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-17
CLI Commands and Messages
CLI Command List
•
• (Circuits 2 through 27)
•
- 28
ds1 28 circuitid "DS1#28"
ds1 28 enable
ds1 28 equipment off
ds1 28 length dsx0
ds1 28 line off
ds1 28 linecode b8zs
ds1 28 loopdetect off
ds1 28 metallic off
ds1 28 send off
Performance Thresholds: 15 min. 1 hour 1 day
-------- -------- --------
coding violations - line: 13340 40020 133400
errored seconds - line: 65 195 648
CONTROLLER
Name: Controller Settings
Purpose: Display all Controller settings.
Security: ro and above
Syntax: controller
Message:
DS3 (A:Active)> controller
- CONTROLLER
ds1 protect on
ds3 protect off
autocopy on
revertive ds3 off
revertive ds1 off
arm on
ffo present on
security off
screen 24
ip address 192.168.26.49
ip mask 255.255.255.0
ip gateway 192.168.26.202
ip nms1