User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 8-15
CLI Commands and Messages
CLI Command List
Example: clear ds1 5
Clear counts for DS1 #5 interface.
CONFIG
Name: Configuration Settings
Purpose: Display configuration settings of all cards and interfaces.
Security: ro and above
Syntax: config
Message:
- CONTROLLER
ds1 protect on
ds3 protect off
autocopy on
revertive ds3 off
revertive ds1 off
arm on
ffo present off
security off
screen 24
ip address 192.168.26.44
ip mask 255.255.255.0
ip gateway 192.168.26.202
ip nms1 192.168.41.46
ip nms2 192.168.25.212
ip nms3
ip ppp
ip route ethernet
ds1 all Clear all low-speed interface statistics and log data
ds3 Clear DS3 statistics
log
Clear event log
log standby
Clear standby Controller event log
wtr
Clear 5-minute wait-to-restore period
Field Description