User manual

CLI Commands and Messages
CLI Command List
8-10 July 2004 Wide Bank 28 DS3 - Release 2.4
CLI Command Syntax
The command syntax uses the following conventions:
 Courier Font is used for command words
 Italic Font indicates a variable for which you must substitute a value or word
 Curly Brackets { } enclose required parameters
 Square Brackets [ ] enclose optional items
 Vertical Rules | | | separate items in a list for which you must select only one item
NOTE: The Wide Bank ships with all configuration parameters set to factory default
values unless otherwise specified. Default values appear in bold type in the tables
following the CLI command syntax. The Wide Bank can be restored to these default values
at any time RESTORE on page 8-63.
CLI Shortcuts (Recall and Edit)
To simplify entering repetitive commands, CLI allows you to “recall” the previous three commands
entered by typing Ctrl+R (hold the Ctrl key down and press the R key). To go “forward,” type
Ctrl+F.
CLI also allows you to edit commands by using the Backspace key to delete mistakes and retyping
characters. This also allows you to easily recall and edit a previous command to change characters,
and then press the Enter key to enter the modified command.