User manual

Diagnostics & Troubleshooting
Testing Low-Speed Interface Operation
7-30 July 2004 Wide Bank 28 DS3 - Release 2.4
2. Run test on low-speed circuit #5
(A:Active)> test ds1 5
Testing DS1 5
---- ----
DS1 5 Selftest: Pass
Show low-speed circuit #5 parameters.
(A:Active)> ds1 5
- 5
ds1 5 circuitid "DS1 5"
ds1 5 enable
ds1 5 equipment off
ds1 5 length dsx0
ds1 5 line off
ds1 5 linecode b8zs
ds1 5 loopdetect off
ds1 5 metallic off
ds1 5 send off
Performance Thresholds: 15 min. 1 hour 1 day
-------- -------- --------
coding violations - line: 0 0 0
errored seconds - line: 0 0 0
3. Restore Spare A group protection
(A:Active)> ds1 5 move home
DS1 5 moved to home
(A:Active)> status ds1 all
Interface Receive Transmit Loop Protection
--------- ------- -------- ---- ----------
DS1 1 Traffic Traffic None by Spare 1
DS1 2 Traffic Traffic None by Spare 2
DS1 3 Traffic Traffic None by Spare 3
DS1 4 Traffic Traffic None by Spare 4
DS1 5 Traffic Traffic None by Spare 1
DS1 6 Traffic Traffic None by Spare 2
DS1 7 Traffic Traffic None by Spare 3
DS1 8 Traffic Traffic None by Spare 4
DS1 9 Traffic Traffic None by Spare 1