User manual

Diagnostics & Troubleshooting
Self-Tests
7-14 July 2004 Wide Bank 28 DS3 - Release 2.4
Complete Self-Test (Power-Up Test)
Use the complete self-test to test the entire Wide Bank with one command. This test runs
automatically when power is turned on.
(A:Active)> test all
WARNING: This command affects service. Continue? [y|n]? y
Testing all interfaces...
DS1 Card 1 Self Test: Pass
DS1 Card 2 Self Test: Pass
DS1 Card 3 Self Test: Pass
DS1 Card 4 Self Test: Pass
DS1 Card 5 Self Test: Pass
DS1 Card 6 Self Test: Pass
DS1 Card 7 Self Test: Pass
DS1 Spare Card Self Test: Pass
DS3 Self Test: Pass
Fan A Self Test: Fan not present
Fan B Self Test: Fan not present
The Complete Self-Test
1. Performs DS1/E1 tests.
2. Performs DS3 tests.
3. Performs FFO tests.
Figure 7-4 Complete Self-Test
Perform
Self-Test
Send AIS
Relays
Trans-
ceiver
Selector
M13
Framer
Trans-
ceiver
Relays
LS Card HS Card
Toward DS1/E1
DS1/E1 DS3
Send AIS
Toward DS3
Perform
Self-Test
Perform
Fan Test