User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 6-29
Configuration
Downloading New Software
NOTE: When the CLI is in E1LS mode, the following low-speed circuit references are
changed to E1 instead of DS1.
4. Press Enter key (now talking to Controller card B).
01:00:29 01/01/1997
Automatic Login to Controller Card B
Equipment Status
--------- ------
DS3 Controller A Standby
DS3 Controller B Active
DS1 Card 1 Active
DS1 Card 2 Active
DS1 Card 3 Active
DS1 Card 4 Active
DS1 Card 5 Active
DS1 Card 6 Active
DS1 Card 7 Active
DS1 Spare Card Card not present
(B:Active)>
5. Type the load command again and enter the following command (Be sure to include the quotes
in the filename, and give the complete path):
(B:Active)> load tftp [TFTP server IP address] “[filename]”
Initializing memory buffer.Downloading Image using TFTP.
Please wait...
TFTP Download Finished
Verifying. Please wait...
Verification Successful