User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 6-27
Configuration
Downloading New Software
1. Log in to the Wide Bank.
2. At the prompt, enter the load command, as follows (Be sure to include the quotes in the
filename, and give the complete path):
(A:Active)> load tftp [TFTP server IP address] “[filename]”
Initializing memory buffer...
Downloading Image using TFTP. Please wait...
TFTP Download Finished Verifying. Please wait...
Verification Successful
Figure 6-5 Downloading Code to Controller A RAM
Do you want to Program the FLASH now (y/n)?
3. Enter Y.
Please wait until this controller comes alive (approximately
1 minute).
Switching control to Standby Controller
FLASH
MEM
Controller
A
Transfer
Control
FLASH
MEM
Controller
B
Load Command causes new code to be
downloaded to Controller A memory
Controller A maintains control and still handles all traffic