User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 6-7
Configuration
Basic Configuration
Setting the Time and Date
Although the working configuration is retained when power is turned off, the system clock time and
system date are lost. To set the time and date:
Set System Time
(A:Active)> time
The time is 16:01:20 10/01/2001
(A:Active)> time 16:20:00
The time is 16:20:00 10/01/2001
Set System Date
(A:Active)> date 10/24/2001
The time is 16:21:33 10/24/2001
Setting System Security, Users, and Login Passwords
(Basic Security)
All configurations of the Wide Bank support a multiple-level user and password security system for
the CLI. With this basic security system, each user is assigned an access level and, optionally, a
password. The access level limits the user to operate with a specific set of commands. Enhanced
security, available as the "Security Upgrade" option, provides additional security features. If your
Wide Bank has the Security Upgrade option, see Setting System Security, Users, and Login
Passwords (Security Upgrade Option) on page 6-10.
See the following sections for information about security tasks:
 Access Levels (Basic Security) ... 6-8
 Password Protection (Basic Security) ... 6-8
 Display Current Security Status (Basic Security) ... 6-9
 Change the Security Status (Basic Security) ... 6-9
 Add a User (Basic Security) ... 6-9
 Assign or Change a User’s Password (Basic Security) ... 6-9
 Set a User’s Access Level (Basic Security) ... 6-9
 Delete a User (Basic Security) ... 6-9
 Show Current User Settings (Basic Security) ... 6-9