User manual

Electrical Installation and Cabling
Low-Speed DS1/E1 Cables
5-8 July 2004 Wide Bank 28 DS3 - Release 2.4
Figure 5-4 Connecting the Low-speed Cables
Figure 5-5 Fastening & Tying Down Low-speed Cables
Connect the cable ends with the
drain leads to the LOW SPEED
IN (receive) and OUT (transmit)
connectors on the Wide Bank 28.
Note that the two cables are identical,
so transmit and receive integrity must
be observed.
LOW SPEED
External
Grounding
Lug
DS1 Drain
Wires
LOW SPEED
DS1 IN
DS1 OUT
Fasten DSX-1 Cables
to bar with cable ties
Spring-loaded Latch
Connector Retaining
Screws