Owner's Manual

15
The lock off switch is used to prevent unintentional
starting.Forstartingoperationofthetool,rstdepress
the lock-off button and hold it in position, then press the
on/off switch and release it to start operation.
For safety reasons the on/off switch cannot be locked; it
must remain pressed during the entire operation.
2. LOCK OFF SWITCH (SEE FIG. G)
OPERATION
Fig. G
Alwaysensureyoumaintainarmgripwhilstoperatingyourjigsaw.
1. HAND GRIP AREAS
1
2
Slide the fully charged battery pack onto the tool with
sufcientforceuntilitclicksintoposition.
4. TO INSTALL THE BATTERY PACK (SEE FIG. F2)
Fig. F2
Thengerprotectionislocatedinfrontofthebladeholder.Whilstworking,itwillhelppreventaccidentalcontactwith
moving blade.
3. FINGER PROTECTION
After press the on/off switch to start, the LED light (13) will be on while working. The light will be off when the machine
stops.
4. LED LIGHT