Sideboard Version:07/26/2023 1/18
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 48 6 x 35 mm Fx6 4 x 50 mm B x 48 15 x 9 mm G x 35 C x 20 8 x 30 mm Hx8 D x 10 4 x 35 mm Jx5 CL x 6 Qx4 Rx2 6 x 30 mm 3 x 12 mm Mx8 3 x 14 mm 4 x 30 mm CR x 6 E x 60 DR x 6 Sx2 4 x 14 mm 3/18 DL x 6 Px2
1 4 5 6 7 5 8 7 2 3 6 10 12 13 6 6 11 16 This is a permanent label. Do not remove! 4/18 15 9 16 15 16 14 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers.
1 E x 18 Ax4 6 x 35 mm CR x 3 CL x 3 3 x 12 mm Fix slide rail(CL) and (CR)to both side of No.3 plate with screw(E) as shown. Insert quickfit screw(A) into both side of No.3 plate as shown. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver or use force to rotate, may cause crack.
2 E x 18 Ax8 6 x 35 mm CR x 3 CL x 3 3 x 12 mm Fix slide rail(CL) and (CR)to No.2, No.4 plates with screw(E) as shown. Insert quickfit screw(A) into No.2, No.4 plates as shown. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver or use force to rotate, may cause crack.
3 Dx2 4 x 35 mm Attach No.8 to No.3 plate with screw(D) as shown.
4 Cx4 Bx4 15 x 9 mm 8 x 30 mm Attach No.6 to No.3 plate with wooden dowel(C)and turn cam locks(B)clockwise to tighten as shown.
Cx4 Bx8 5 15 x 9 mm 8 x 30 mm Connect No.2 and No.4 plates to the component with wooden dowel(C)and turn cam locks(B)clockwise to tighten as shown.
6 Insert No.7 plate into available slots as shown. 7 7 7 Fx6 Ax6 6 x 35 mm 4 x 50 mm Attach No.5 to No.1 plate with screw(F) as shown. Insert quickfit screw(A) into No.1 plate as shown. Please pay attention to the holes where the accessories are inserted.
8 Cx6 Bx6 15 x 9 mm 8 x 30 mm Cover No.1 plate to the component with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
9 Gx 5 J x5 4 x 30 mm G Fix part(J) into No.11 plate with screw(G) as shown. G J J G 11 G J G G J J J 10 Dx6 Cx6 4 x 35 mm 8 x 30 mm Cover No.11 plate to the component with wooden dowel(C) at first, then use screw(D) to fix as shown.
11 DR x 6 E x 24 DL x 6 3 x 12 mm Fix slide rail(DL) and (DR)to No.9, No.10 plates with screw(E) as shown. E E DR E 10 E DL 12 9 E x6 G x 30 4 x 30 mm Attach No.9, No.10 and No.14 to No.12 plate with screw(G)as shown.
A x 15 13 6 x 35 mm B x 15 15 x 9 mm Insert No.13 plate into available slots as shown. Insert quickfit screw(A) into No.16 plate as shown. Attach No.16 plate to the component and turn cam locks(B)clockwise to tighten as shown.
14 A x 15 6 x 35 mm B x 15 15 x 9 mm Insert quickfit screw(A) into No.15 plate as shown. Attach No.15 plate to the component and turn cam locks(B)clockwise to tighten as shown.
15 Align rails, put all drawers.
16 Hx8 Mx8 Px2 Qx2 3 x 14 mm Sx2 4 x 14 mm P Q S M Q P S Q H M M M P S M H H H H M H M M H M H 17/18 H
17 Qx2 Dx2 Rx2 4 x 35 mm P Q 6 x 30 mm D R Q D R Q D 18/18
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
