Specifications

The installing method of the Ethernet cable: Take the Ethernet cable out of the packaging bag, align it
with the position of the network port, and insert the Ethernet cable into the network port. After
installation, the Ethernet cable cannot be pulled out directly. The schematic diagram of installing the
Ethernet cable is given as follows:
6. Application examples
WIA-FA wireless communication devices are mainly used for wireless interconnection of machines
and devices in the factory floor, especially logistics devices that are most widely used. Taking AGV
applications as an example, the typical network architecture of WIA-FA networks for AGV applications is
shown in the following figure. AGVs are connected to FDs through cables, and FDs communicate with
ADs bidirectionally through wireless links. All ADs and the gateway are connected with a wired LAN
through a switch, and the AGV data are finally sent to the AGV server.
AGV Server
WIA-FA
Gateway Device
WIA-
FA
A
ccess Device 1
IP address: 192.168.0.1
TCP client
AGV1
IP address: 192.168.0.2
TCP client
AGV2
IP address:
192.168.0.3
TCP client
AGV3
IP address: 192.168.0.4
TCP client
AGV4
IP address：192.168.0.100
Port number 5000
TCP Server
WIA-FA
Access Device 2
WIA-FA
Field Device 1
WIA-FA
Field Device 2
WIA-FA
Field Device 3
WIA-FA
Field Device 4