User Manual

User Manual
Instructions
For Use
01. Turn on/off
and Play/Pause
When long-pressing the ⑤ Power button for two seconds, the LED light flashes on with the "Power On" sound, and the power is turned on. After a device is connected, short-press ⑤ Button to play/pause.
When long-presing the button that is turned on for two seconds, the LED light goes off with the "Power Off" sound. The power is off now.
02 Adjust Echo and
Mic Volume
* Echo adjustment: Move the ③ Echo Mode button up (+) and down (-) to increase or reduce echo.
* Mic volume adjustment: Move the ④ Microphone Volume Control button up (+) and down (-) to increase or reduce volume.
03. Adjust Speaker
Volume
When pressing the ⑥ Speaker Volume down (-) , the volume is reduced and pressing several times mute the sound. When pressing the ⑦ Speaker volume up (+), the volume is increased and pressing the
button to exceed the maximum output leads to an alert sound.
* Adjust the volume in the smartphone when adjusting the sound at or above its maximum output.
04. Play
previous/Next
song
Pressing the ⑧ Play Previous Music restart the song that was being played, and pressing again playes the previous music. Pressing the ⑨ Play Next Music playes the next song.
* This may be different depending on the application used in the smartphone.
05. Connecting to
a bluetooth
(Pairing)
1. Press the power button for two seconds, the LED light flashes on with the "Power On" sound, and the power is turned on.
2. Next, with the "Bluetooth Mode" sound, the power button LED light flickers.
3. Turn on the bluetooth of the smartphone, search and pair with the main mic. (bluetooth name: -----). When the connection is properly done, the LED light in the power button stops flickering.
* A device that was paired before is automatically reconnected when turning the power on.
* Repeat the pairing process again if the reconnection is not done automatically.
06 Connecting two
mics (Dual Pairing)
1. Turn off the bluetooth of the device (smartphone) to be connected before use.
2. Long-pressing the power button of the two mics for two seconds turns on the power with the "Bluetooth Mode" sound, and the LED light flickers on the power button.
3. Choose one mic as a main mic. Short-press the power button of the main mic. A "Ding-dong" sound is created and the dual pairing starts.
4. After 1~3 seconds, the same "Ding-dong" sound comes from a sub-mic, connecting the two mics. When the connection is properly done, the LED light in the power button stops flickering.
5. Turn on the bluetooth of the smartphone to be connected, search and pair with the main mic. (bluetooth name:
TinyTAN01
). The duet mode has been set up.
6. To dual pair with other mics, turn off the power button of the connected device, and repeat the process from 1~5 using a new Mic.
* Dual pairing is suppored when using the same model manufactured by this company.