User's Manual

Wi-linktech Communication Technologies (Shanghai) Co.,Ltd.
investigation is especially important when integrating multiple modular
transmitters where the certification is based on testing each of them in
a stand-alone configuration. It is important to note that host product
manufacturers should not assume that because the modular transmitter is
certified that they do not have any responsibility for final product
compliance.
c) If the investigation indicates a compliance concern the host
product manufacturer is obligated to mitigate the issue. Host products
using a modular transmitter are subject to all the applicable individual
technical rules as well as to the general conditions of operation in
Sections 15.5， 15.15， and 15.29 to not cause interference. The operator
of the host product will be obligated to stop operating the device until
the interference has been corrected
Additional testing， Part 15 subpart B disclaimer
The final host / module combination need to be evaluated against the
FCC Part 15B criteria for unintentional radiators in order to be properly
authorized for operation as a Part 15 digital device .
The host integrator installing this module into their product must
ensure that the final composite product complies with the FCC requirements
by a technical assessment or evaluation to the FCC rules
， including the
transmitter operation and should refer to guidance in KDB 996369.
2019.03
www .w i - li nk te ch .c om
18