Specifications

Wi-linktechCommunicationTechnologies(Shanghai)Co.,Ltd
Sections 15.5， 15.15， and 15.29 to not cause interference. The operator
of the host product will be obligated to stop operating the device until
the interference has been corrected
The WLT8016 module is based on FR8016HA chip .support standard
Bluetooth 5.0 commands. For the testing module on your product, user can
refer to specification of the Bluetooth system on how to configure and
evaluate the module.This specification can also be found on the official
Bluetooth website:
https://www.bluetooth.org/en‐us/specification/adopted‐specifica
tions.
Additional testing， Part 15 subpart B disclaimer
The final host / module combination need to be evaluated against the
FCC Part 15B criteria for unintentional radiators in order to be properly
authorizedfor operation as a Part 15 digital device .
The host integrator installing this module into their product must
ensure that the final composite product complies with the FCC requirements
by a technical assessment or evaluation to the FCC rules， including the
transmitter operation and should refer to guidance in KDB 996369.
Frequency spectrum to be investigated
For host products with certified modular transmitter， the frequency
range of investigation of the composite system is specified by rule in
Sections 15.33(a)(1) through (a)(3)， or the range applicable to the
digital device， asshown in Section 15.33(b)(1)， whichever is the higher
frequency range of investigation.
Operating the host product
When testing the host product ， all the transmitters must be
operating.The transmitters can be enabled by using publicly-available
drivers and turned on ， so the transmitters are active. In certain
2019.09
www .w i - li nk te ch .c om
17