User Manual
Table Of Contents
- Contents
- Important Information
- Notices
- Description
- Installation
- Configuration
- Overview
- Accessing the Main Menu
- Configuring with the Main Menu
- Unit Identification
- Hardware/Software Revision
- System Software ROM Images
- System Current Status
- Network Configuration
- IP Filter Configuration
- VLAN Configuration
- Viewing VLAN Configuration
- Port Configuration
- Press Esc to exit the menu
- Setting the Default VLAN ID
- Setting the Port Link Type
- Setting the Port Priority
- Setting the Port Acceptable Frame Type
- Enabling Port Ingress Filtering
- Enabling Port Egress Filtering
- VLAN Registration Configuration
- Creating/Modifying a VLAN Registration Entry
- Deleting a VLAN Registration Entry
- Displaying the VLAN Registration Table
- Below is a sample table:
- MAC Address Filter Configuration
- Creating/Modifying a MAC Address Filter Entry
- Removing a MAC Address Filter Entry
- Displaying the MAC Address Filter Table
- Below is a sample table:
- Traffic Class Configuration
- Á To view the Traffic Class Configuration menu
- Assigning Packet Priority to Traffic Classes
- Spanning Tree Configuration
- Á To view the Spanning Tree Configuration menu
- Enabling Spanning Tree
- Setting the Bridge Priority
- Setting Port Priority
- Setting Port Path Cost
- RF Station Configuration
- Viewing Current RF Station Configuration
- Setting the Operating Mode
- Setting Test Mode Timer Minutes
- Performing Link Monitor Test (Normal Mode)
- Performing Transmit and Receive Tests
- Setting the RF Transmit Status
- Setting the Link Monitor Period
- Setting Maximum Remote Distance (Base Station Only)
- Setting Link Monitor Remote Station Rank
- Adjusting Throttling (Remote Station Only)
- Setting Tx Power Automatically (Remote Station Only)
- Adjusting User Output Power Ceiling (Remote Station Only)
- Setting Signal Margin (Remote Station Only)
- Viewing Current Output Power Level Adjust
- Radio Module Configuration
- Viewing the Radio Module Configuration
- Setting Config Test Minutes
- Setting the Station Type
- Setting the Station Rank
- Setting the Center Frequency
- Setting Security Passwords
- Setting the Scrambling Code
- Setting the Acquisition Code
- Adjusting the Tx Power Level
- Setting a Base to Repeater Mode (Base Station Only)
- Setting System Symmetry Type (Base Station Only)
- Setting Dynamic Polling Level (Base Station Only)
- Setting Remote Unit RF Group
- Rebooting and Saving RF Module Configurations
- RF/Ethernet Statistics
- System Security
- System Commands
- Link Monitor Display
- Logout
- Command Line Interface
- Troubleshooting
- Appendix A: Planning Your Wireless Link
- Appendix B: Using HyperTerminal
- Appendix C: Configuring a Simple Data Network
- Appendix D: SNMP
- Appendix E: Configuration Via the Web
- Appendix F: Upgrading Software
- Appendix G: Network Plan Template
- Index
APR 2002 Rev 03 29
Configuration
Overview
This section explains how to use the Main Menu to configure and test your AWE unit, and to obtain useful
statistical and maintenance information.
Main Menu
In this section, each item in the Main Menu is described in the order that it appears in the menu. Use the Main
Menu and your keyboard keys to select, view or change settings. Some items in the menu simply display
information, while others ask you to enter data or make a selection from a list.
Main Menu
Wi-LAN AWE 120-58 Main Menu
-> Unit Identification
Hardware/Software Revision
System Software ROM Images
Current System Status
Network Configuration
IP Filter Configuration
VLAN Configuration
RF Station Configuration
Radio Module Configuration
RF/Ethernet Statistics
System Security
System Commands
Link Monitor Display
Logout