User Manual

Audio Cable Connection

1. Locate the 1/8” to 1/8” TRS stereo audio cable or

the 1/8” to XLR TRS audio cable. Use the 1/8”

TRS to XLR audio cable if your camera is

equipped with XLR audio input ports.

2. Insert the 1/8” TRS stereo end of the audio cable

into the Wi Receiver audio output jack.

3. Insert the 1/8” TRS stereo end or the XLR end of

the audio cable into the Camera MIC-IN or Line-In

audio input jack.

For best audio results we recommend connecting

to the Line-In input if available.

Camera Connection

The Wi Transmitter and Receiver are designed

to mount video camera DSLR and handheld

recorders.

1. Locate the 1/4”-20 Hot Shoe ash adapter

for cameras, tripods and bipods.

2. Fasten the 1/4”-20 Hot Shoe ash adapter

mounting screw to the belt clip 1/4”-20 nut

and tighten the top lock ring.

3. Loosen the bottom lock ring on the 1/4”-20

Hot Shoe ash adapter camera accessory.

4. Insert/slide the mounting foot of 1/4”-20 Hot

Shoe ash adapter into the camera accessory

shoe and tighten the bottom lock ring.

To emulate direct lavalier connection setting for your

camera, change the Transmitter mode setting to Line-in

mode.

CAMERA CONNECTION