QUICK INSTALLATION GUIDE Wi AudioLink DIGITAL WIRELES S T E R E O TM w w w.jangusmusic.
Charging 1. Plug the AC Charger into a power socket. 2. Connect the USB Y-Split power cable to the USB port on the AC charger. 3. Connect one of the two mini USB connectors into the transmitter USB port. 4. Connect the second mini USB connector to the receiver USB port. 5. The Power/Status LED will turn to solid Red ON. 6. When charging is complete the Red LED will turn OFF. 7. Remove the charging cable and adapter and store in the carrying case. The battery will last 4 to 6 hours of continuous operation.
Pairing 1. First turn ON the transmitter (Tx) and the receiver (Rx) units by pressing and holding the POWER button k , v on each of the units for 2 seconds. 2. Press and hold the LINK buttonp on the transmitter (Tx) for 3 seconds. The Power/ Status LED on the transmitter will start flashing. The transmitter is now in a Pairing mode and ready to search for receivers. 3. Press and hold the LINK button z on the receiver (Rx) for 3 seconds. The Power/ Status LED on the receiver will start flashing.
Transmitter Connection 1. Connect the 1/8” stereo male end of the cable into the “Audio Input” jack on the transmitter. 2. Route the audio cable beneath the belt clip as shown to prevent accidental disconnection of the cable. 3. Connect the 1/4” mono male end of the cable into the electric guitar. Use the 1/4” stereo cable for digital piano, keyboard or electronic drums connection. 4. Power up the transmitter by pressing and holding the POWER button v for 2 seconds. 5.
Receiver Connection PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the receiver. 2. Route the audio cable beneath the belt clip as shown to prevent accidental disconnection of the cable. 3.
QUI CK U SER GU ID E TM Wi AudioLink TM © 2010 Jangus Music, Inc. All rights reserved. Wi and Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. The Wi AudioLink is a trademark of Jangus Music, Inc. All other trademarks included herein are the property of their respective owners. US and Foreign Patents Pending. (Design and specifications are subject to change without notice). w w w.jangusmusic.
Wi Transmitter 1. Audio IN Jack 7. Link/Pairing 2. Power ON/OFF 8. Sleep 3. Power/Status LED 9. Operation Mode 4. Volume UP 10. USB Charging Port 5. Volume Down 11. Belt Clip 6.
Transmitter Button Function Function Button Hold LED Status Power ON/OFF POWER Pairing Mode LINK Signal Routing LINK Volume UP Volume Down Mute ON/OFF Sleep Wake up Passive Guitar MODE (Factory Setting) Active Guitar (Mono Line-in) Line in Stereo 2 sec 3 sec Click Click Solid Green Fast Green Flashes 1.
Wi Receiver 1. Audio OUT Jack 7. Next Track 2. Power ON/OFF 8. Previous Track 3. Power/Status LED 9. Mute/ Play/Pause 4. Volume UP 10.USB Charging Port 5. Volume Down 11. Belt Clip 6.
Receiver Button Function Function Button Hold LED Status Power ON/OFF POWER 2 sec Solid Green Pairing Mode LINK 3 sec Volume UP Volume Down Click Mute ON/OFF Fast Green Flashes 1.
